ABS  Acetal  ESR Reflector  FEP PTFE  Halar®  HDPE  Hytrel®  Kapton®  Kynar®, Solef®  Mylar PEEK PFA PTFE  PES Ultrasone®E  PPS  PTFE  Tefzel® TPX UDEL UHMW Ultem®
Talk LIVE with CS Hyde Rep 8am-5pm CMT

Search CSHyde.com

Browse Catalog
Loading Dock
Contact Us
Lamination
Die Cutting

Proceed to CS Hyde's Online Store front

Black UHMW Film - CS Hyde Company
 Anti Stat BLACK UHMW Film

Proceed to CS Hyde's Online Storefront

-Black UHMW Properties THIN GAUGE  (.003 to .020")  

PRODUCT DESCRIPTION
Black UHMW film is skived from UHMW (Ultra High Molecular Weight Polyethylene) that has been compounded with a small amount of carbon to render it black and semi-conductive, producing a "windowless", truly opaque film. The carbon also provides UV resistance.

 

APPLICATION INFORMATION

Wear surface where high abrasion resistance is required, such as the outer covering on hoses for severe service applications. It is also used as an anti-squeak tape for automotive and other mechanical applications.

 

Technical Data - Anti-Static Black UHMW

PROPERTY

TEST METHOD

DATA

Base Film

 

Black UHMW Film

Tensile Strength (psi)

ASTM-D 882

5000

Elongation (%)

ASTM-D 882

250

Max. Operating Temp. (F)

 

200

Volume Resistivity (ohm-cm)

ASTM-D 257

>10 6th

 

 

 

-Black UHMW Properties - THICK GAUGE  (.030" to .125")


MECHANICAL PROPERTIES

PROPERTY

ASTM TEST

UNITS METRIC (U.S)

.030"

.060"

.125"
Density  D792  gm/cc  0.93  0.93  0.93 
Tensile Strength @ Yield  D638  MPa(psi)  23(3300)  20(2964)  22(3227) 
Tensile Strength @ Break D638  MPa(psi)  53(7740)  49(7056)  44(6373) 
Elongation @ Break  D638  %  460 463  466 
Youngs "E" Modulus   D638  MPa(psi x 105)  725(1.05)  731(1.06)  672(0.97) 
Izod Impact Strength (23oC)  D256(1)  J/m(ft-lb/in notch)       
Izod Impact Strength (-40oC)  D256(1)  J/m(ft-lb/in notch)       
Hardness Shore "D"  D2240  -  65  65  65 
Abrasion Resistance           
Water Absorbtion   D570   % Nil  Nil    Nil
Relative Solution Viscosity  D4020  dl/gm   2.3 - 3.5  2.3 - 3.5  2.3 - 3.5  
COEFFICIENT OF FRICTION
Static      0.16  0.16  0.16 
Dynamic      0.14  0.13  0.14 
(1) Izod Impact Strength: Samples have two(15o +/- 1/2o) notches on opposite sides to a depth of 5mm.
 

COMPARISON OF DYNAMIC COEFFICIENT OF FRICTION ON POLISHED STEEL
 

PROPERTY

DRY

WATER

OIL
UHMW-PE .10-.22 .05-.10 .05-.08
NYLON 6 .15-.40 .14-.19 .02-.11
NYLON 6/6 .15-.40 .14-.19 .02-.11
NYLON/MoS2 .12-.20 .10-.12 .08-.10
PTFE .04-.25 .04-.08 .04-.05
Acetal COPOLYMER .15-.35 .10-.20 .05-.10

THERMAL PROPERTIES
 

PROPERTY

ASTM TEST

UNITS METRIC (U.S)

.030"

.060"

.125"
Crystalline Melting Range  Polarizing  oC(oF)  136(276)  134(273)  134(273) 
Crystallinity  D3417-96  %  48  47  50 
COEFFICIENT OF LINEAR EXPANSION
20 - 100oC  D696  TBD  TBD     TBD   TBD   
-20 to -100oC  D696  TBD  TBD  TBD  TBD 

ELECTRICAL PROPERTIES
 

PROPERTY

ASTM TEST

UNITS METRIC (U.S)

.030"

.060"

.125"
Volume Resistivity  D357  Ohms/cm  5.9544x10^7  1.4516x10^7   >2.000x10^13
Dielectric Strength  D150  KV/cm (V/mil)  *    * 142 
Dielectric Constant  D150    2.481  2.454   2.542
Surface Resistivity 1% Carbon Black  D257  Ohms  10^3  10^3  10^3 
Static Decay 1% Carbon Black    Seconds  <.01  <.01  <.01 
DISSIPATION FACTOR 
At 50Hz  D150    0.0594 0.0213 0.0082
At 10KHz D150    0.1085 0.0690 0.0022
At 5MHz D150    0.1035 0.2340 0.0034

* No reading could be taken due to material thickness.

ADHESIVE PROPERTIES
 
Adhesion, 180i Peel 2 mil (0.05 mm) Polyester Support
  U.S. POUNDS FORCE PER INCH WIDTH METRIC NEWTONS PER METER  
Substrate: Stainless Steel (Applied One Minute) 175 1975  
LOOP TACK
Substrate: Stainless Steel 288 3135  
STATIC SHEAR
Temperature Area Load Minutes to Failure
72iF(22iC) 1"(6.5cm2) 5.5 lbs(2.5kg) >10,000
FEATURES BENEFITS STORAGE, SHELF LIFE & TEMP. INFO SURFACE PREPARATION
Polypropylene Carrier Stability in Processing One year when stored at 70i F(21i C) It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease and oil.
Specially Formulated Adhesive Combines high tack and adhesion with excellent shear
  • Minimum Application Temperature: 50i F(10i C)
     
  • Maximum Continuous Operating Temperature: 120i F(49i C)
     
  • Maximum Intermittent Operating Temperature: 175i F(79i C)
  

Proceed to CS Hyde's Online Storefront
 

CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063


©Copyright 2010 CS Hyde Company. All rights reserved.

 Tapes | Films | Fabrics | Silicone | Rubber | 3M | Threads | Belting | Cast Acrylic | More Products
Browse Catalog | Loading Dock | Lamination | Die Cutting | Contact Us | Sitemap

Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis

C4-NGen® and KYNStick® are registered trade names of CS Hyde Company,

Ultem® is a registered trademarks of GE Plastics  Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc. 

Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films.