Buy Now CATALOG

New FILMS By-The-Foot or By-the-Pound:   ABS, Acetal, C6,  Hytrel®, Kapton®, Kynar®, PEEK, TPX®, Udel®, Ultem®

KYNStick® Kynar® Film Tape with adhesive     

COLORED PTFE (TEFLON®) TAPE   

 3M ESR Film (Enhanced Spectral Reflective)

DuPont™   Hytrel® Film

Thermoplastic polyester elastomer  

Hytrel® 7246 is a high modulus, 570 MPa, Hytrel® grade, with nominal durometer hardness of 72D.  It contains colour-stable antioxidants.  It can be processed by many conventional thermoplastic processing techniques like injection moulding and extrusion.

Properties measured at 23°C unless otherwise stated.

Please refer to the Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.

The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication.  This information may be subject to revision as new knowledge and experience becomes available.  The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials or additives or in any process, unless expressly indicated otherwise.  The data provided should not be used to establish specification limits nor used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes.  Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information.  Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.   CAUTION:  Do not use this product in medical applications involving permanent implantation in the human body.  For other medical applications see “DuPont Medical Caution Statement”, H-51459.

Hytrel® 7246

Properties measured at 23°C unless otherwise stated.

Please refer to the Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.

The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication.  This information may be subject to revision as new knowledge and experience becomes available.  The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials or additives or in any process, unless expressly indicated otherwise.  The data provided should not be used to establish specification limits nor used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes.  Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information.  Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.   CAUTION:  Do not use this product in medical applications involving permanent implantation in the human body.  For other medical applications see “DuPont Medical Caution Statement”, H-51459