800-461-4161

Live Chat with CS Hyde RepresentativeTalk LIVE with CS Hyde Rep: QUOTES, Product Info  8am-5pm CST

 sales@cshyde.com

Home Contact Us Search On-Line Catalog
Home
Tapes
Films
Fabrics
Belts
Silicone
Rubber
3M Products
Lamination, Die Cuts
More Products
Cast Acrylic
Buy Now CATALOGCS Hyde Company Catalog of Tapes, Films. Silicone

 

  Kynstick Kynar Tape  KYNStick® Kynar® Film Tape

 

FAT PTFENEW!!   "FAT" TEFLON® (PTFE) Tape

 

Kapton(18-S)-2 Kapton® Tape

PEEK Tape with Adhesive  PEEK TAPE

 

DATA SHEET

 

Product Description:

Extruded, virgin PEEK (polyethetherketone) film has been surface modified on one side and coated with an Acrylic or High Temperature Silicone adhesive.  The acrylic adhesive is resistant to high humidity and harsh chemical environments while retaining good peel strength with clean removal.  Silicone Adhesive has low residue upon removal and withstands temperatures from -100F to +450F.

 

The surface modification enhances bond strength to other materials.  Peel-off liner is applied to the adhesive side.  The untreated side is lubricious, abrasion resistant, and free of pin holes. Series #37-_A (Acrylic) or 37-_S (Silicone)

 

Performance & Application Information:

This tape has the best combination of friction and wear properties combined with high heat resistance (350F with Acrylic Adhesive; 450F with Silicone Adhesive), chemical resistance and electrical insulation.  Tapes can be used on many different hard mating surfaces such as steel, ceramic or glass.  Typical applications for the tape include sliding bearings, abrasion resistant wire wraps and oil field equipment requiring abrasion resistance and electrical insulation.

TYPICAL PROPERTIES PEEK Tape with Adhesive 

Property

Test Method

Data

Backing Material

 

VICTREX® PEEK Film

Backing Thickness

 

.002

Adhesive System

 

Acrylic or Silicone

Adhesive Thickness (in)

 

.002", .005", .010"

Adhesion (oz/in.)

ASTM D-1000

50 - Acrylic; 30- Silicone

Tensile Strength (lb/in)

ASTM D3759

36

Elongation (%)

ASTM D3759

165

Dielectric Strength (volts)

ASTM D149

8800

Max. Operating Temperature (°F)

 

350F- Acrylic; 450F - Silicone

AVAILABILITY

 

 

Core I.D. (in)

 

3

Width (in)

 

.25 up to 24

Roll Length (yd)

 

36

Release Liner

 

Kraft Paper- Acr; No Liner-Sil

Note:  The above are “typical values” which have a nominal range about them and are not intended for specification purposes.

VICTREX PEEK® is a registered trademark of Victrex™, USA

 
CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063 / 847-395-0535


©Copyright CS Hyde Company. All rights reserved.

 

 

TEFLON® is a  Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.

KAPTON®, KEVLAR®,  NOMEX® are Registered Trademarks of E.I. du Pont de Nemours and Company

Rulon® is a registered trademarks of Saint GoBain Performance Plastics Corporation

Kynar® is a registered trademarks of Atofina Chemicals, Inc

Ultem® is a registered trademarks of GE Plastics  Ultrason®E is a registered trademarks of BASF Corporation

TPX® is a registered trademark of Mitsui Chemicals Inc. 

Halar® and Udel® are registered trademarks of Solvay Solexis, Inc  Mylar® is a  registered tradename of DuPont Teijin Films.