CS Hyde Co., IL PPS Polyphenylene Sulfide Film

800-461-4161

Talk LIVE with CS Hyde Rep: QUOTES, Product Info 8am-5pm CST

Email: sales@cshyde.com

PPS (Polyphenylene Sulfide) film is an impact-modified, unreinforced extrusion grade. PPS offers high tensile elongation, unusual flexibility and ductility. Film also has high temperature resistance, impact strength and flexibility. This new grade retains many of the traditional benefits of Fortron® PPS including excellent adhesion to nylons and polyolefins, high chemical resistance and low fuel permeation. For example: .005" film of Fortron PPS SKX-382 has a gasoline (CE10) permeability rate of 0.121 g mm/m2/day, which is far less than that of nylon, polyketone and other resins often used with gasoline and other fuels.

The following physical property information is based on typical values. APPLICATIONS & GENERAL INFORMATION

Properties	Test Method	Units ASTM	Values as Prepared(1)	Units ISO	Values as Prepared(2)
Specific Gravity	ASTM D792	-	1.264
Tensile Strength at Yield @ 0.125" thick -40C RT 60C 120C	ASTM D638	psi	12620 7820 6000 1830	MPa	87.0 46.4 41.4 12.6
Tensile Elongation at Break @ 0.125" thick -40C RT 60C 120C Yield @ 0.125" thick -40C RT 60C 120C	ASTM D638	%	10 25 55 95 6 6 6 30	%	10 25 55 95 6 6 6 30
Flexural Strength@ 0.125" thick RT 120C	ASTM D790	psi	11,500 1640	MPa	79.3 11.3
Flexural Modulus@ 0.125" thick RT 120C	ASTM D790	psi	310,000 41,000	MPa	2140 280
Dielectric constant at 1 GHz	ASTM D150	-	3.3	-	3.3
Notched Izod	ASTM D256	ft. lb/in	9.5	KJ/m2	40
UnNotched Izod	ASTM D256	ft. lb/in	No Break	KJ/m2	40
Dynatub Instrumental impact, Total Energy	ASTM D376 3	ft. lb	45	Dyne-cm	4.1
HDT at 264 psi	ASTM D648	C	82	C	82
Viscosity at 1200 sec-1, 310C		Poise	2750	Poise	2750
Coefficient of linear thermal expansion		cm/cm degCx10-5
Flow direction 0 - 85C			8.44
Flow direction 85-200C			18.3
Traverse direction 0 - 85C			8.32
Traverse direction 85 - 200C			13.4
Flow direction 85-200C			8.32
Compressive strength at 1% strain RT 120C	ISO604	psi	3215 780	MPa	22 5.5
Compressive modulus RT 120C	ISO604	psi	328,000 52,215	MPa	2260 360
Compressive strength at 1% strain RT 120C	ISO604		p8.32
Instrumental Impact total energy	ASTM	ft lbs a	44.7	MPa	2260 360
Static coefficient of friction - steel	ASTM		0.2
Dynamic coefficient of friction - steel	ASTM		0.2
Wear from abrasive wheels (CS-17)	ISO9352/
0-1000cps	ASTM4060	mg/1K cycl	12-5
0-10000cps	ASTM4060	mg/1K cycl	5.6
Rockwell Hardness	ASTM		40.7
Water Absorption	ASTMD570		0.027

(1)Cold Mold about 90°C (2) Cold Mold about 90°C

CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063 / 847-395-0535

TEFLON® is a Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.

KAPTON®, KEVLAR®, NOMEX® are Registered Trademarks of E.I. du Pont de Nemours and Company

Rulon® is a registered trademarks of Saint GoBain Performance Plastics Corporation

Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation

Halar® and Udel® are registered trademarks of Solvay Solexis, Inc Mylar® is a registered tradename of DuPont Teijin Films.