Solid Silicone Sheet: CS Hyde Co, IL, USA

Solid Sheet Reinforced Solid Silicone Rubber Sponge Foam Silicone Coated Fiberglass Strip-n-Stick® Silicone Self-Fusing Tape Extruded Parts

Talk LIVE with CS Hyde Rep 8am-5pm CMT

Solid Silicone Sheet - CS Hyde Company
Solid Silicone Sheet

Solid Silicone Sheet (AKA Silicone Pad). High temperature properties. Superior pad, gasket, die cut part, separator material, Press Pad. Available from 30-70 Durometer Shore "A" Hardness. Thickness from 1/32" to 1/2". Many Grades available. Products meet many commercial, Mil-Spec, Aircraft, FDA, UL, Flame Retardant Standards. (For Silicone Gasket Tape, click here)

Commercial Grade - Commercial Grade silicone sheeting is designed to be used in applications where physical properties are not critical but extreme temperature resistance is still needed.
Electrically Conductive - Electrically Conductive Grade silicone sheeting is designed to be used in many different applications. It is black; carbon filled silicone sheeting that will act as a low amperage conductor and provide protection against electrostatic discharge.
FDA Approved - This material is low volatile, peroxide free and does not discolor over time. Silicone is odorless, tasteless, chemically inert and non-toxic. It offers all FDA approved ingredients, low compression set and fungus resistance.
Fiberglass Reinforced - Fiberglass reinforced press pad material is typically used for flexible circuitry laminations.
Flame Retardant - Flame Retardant silicone sheeting is designed to be used in applications where higher physical properties are required.
Fluorosilicone - Fluorosilicone is resistant to harsh chemicals, fuels, oils and solvents while being able to handle extreme temperatures.
High Strength - Superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication.
High Temperature - High Temperature silicone sheeting is designed to be used in applications where very extreme temperature resistance is required for extended periods of time.
Medical Grade - This material is low volatile, peroxide free; platinum cured and does not discolor over time. Silicone is odorless, tasteless, chemically inert and non-toxic. Medical Grade silicone is able to pass a flammability rating of UL94 HB.
Specification Grade - Can be used for insulating and cushioning electronic assemblies. It is also used for gaskets, automotive seals and hoses, shaft sealing rings, spark plug caps, vibration and sound damping, industrial rollers, press pads, thermal shielding, food and cosmetic services, heat sealing and packaging, grommets etc...
Thermally Conductive - Thermally conductive solid silicone is an unsupported silicone rubber. This material offers thermal conductivity along with electrical isolating for heat transfer between PC boards and heat sinks.
Translucent - Translucent Grade solid silicone rubber can be used in a wide variety of applications. This material is low volatile, peroxide free and does not discolor over time.

CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063

Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis

C4-NGen® and KYNStick® are registered trade names of CS Hyde Company,

Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc.

Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films.