Talk LIVE
with CS Hyde Rep 8am-5pm CMT |
 |
 |
 |
 |
 |
|
SOLStick®
PVDF Film
Tape
with Acrylic Adhesive
Solef
®( PVDF) can be used as a substitute for Tedlar® - ask for info.
SOLStick® PVDF Tape with pressure sensitive adhesive is an exclusive CS Hyde Tape. SOLStick® Tape is made with Solef® film with an Acrylic Pressure Sensitive Adhesive for ease of application, positioning and fastening. SOLStick® Tape offers excellent chemical and corrosion resistance and has a high tensile strength. SOLStick® has good thermal stability and can be used in applications up to 300°F. Solef® (PVDF) has extremely high purity which makes it a good candidate for food applications. When specified, Solef 740 FILM complies with FDA regulation 21 CFR 177.510, USDA, USP XX Class VI, 3A sanitary standards and meets ASTM D3222 resin specifications. SOLStick® Tape also possesses high impact resistance and is tough and durable. SOLStick® is Clear with a Peel-off liner.
PVDF (Solef ®) is strong and tough as reflected by its tensile properties and impact strength. Compared to many thermoplastics, PVDF (Solef ®) has excellent resistance to creep and fatigue, yet in thin sections such as films, PVDF (Solef ®) components are flexible and transparent. Solef ® Film is stable to UV and the effects of weather. In cold, heat, sunlight and humidity Solef® Film does not wear out or get brittle. Solef® has low NBS smoke generation and superior LOI.
|
ADVANTAGES OF Solef® (PVDF) FILM
|
SOLStick® Tape can be supplied with high tack adhesives. Acrylic Adhesive offers good adhesion, chemical and environmental resistance. Tape has a peel-away liner.
SOLStick® Tapes are available in with .005" or .010" Solef® film thickness. Other thicknesses are available on a custom basis. SOLStick® Tape is semi-transparent and relatively colorless. Product Series is #SolStick-A_A (Acrylic) Widths can be cut from narrow to wide. SOLStick® can also be die cut into custom shapes or sheeted by-the-foot.
Technical Data - SOLStick® Solef® Film Tape
|
PROPERTY |
DATA |
|
Backing Material |
Solef® Film |
|
Backing Thickness (in) |
.005" or .010" |
|
Adhesive System |
Acrylic |
|
Adhesive Thickness (in.) |
.002” or .005" |
|
Tensile Strength (pli) |
31.08 |
|
Elongation (%) |
45.1 |
|
Dielectric Breakthrough (kV) |
7.52 |
|
Peel Strength (pli) |
3.53 |
|
Max. Operating Temp. (F) |
300 |
AVAILABILITY |
|
|
Core Dia. (in) |
3" |
|
Width (in.) |
.125-36 |
|
Roll Length |
36 – 60 yds |
Out gassing: PVDF (Solef ®) exhibits extremely low weight loss when exposed to high vacuum.
Light Transmittance: Where opacity and transparency of films are important, light transmission can be a determining factor for the proper film choice. Light transmittance=93%, Film Only. Light Transmittance With Adhesive has not yet been determined but is expected to test very well.
Permeability to Gases: PVDF (Solef ®) film = Low permeability to water vapor & various other gases.
|
Gases |
cc-mils/100 in 2/24 frs - atm |
|
CO2 |
5.5 |
|
Nitrogen |
9.0 |
|
Oxygen |
14.0 |
|
Water Vapor |
2.6 (g-mil) |
CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063
©Copyright 2006 CS Hyde Company. All rights reserved.
Tapes
| Films |
Fabrics |
Silicone |
Rubber |
3M |
Threads |
Belting |
Cast
Acrylic | More
Products
Browse
Catalog | Loading
Dock | Lamination
| Die Cutting |
Contact Us |
Sitemap
Teflon® is a Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.
Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis
C4-NGen® and SOLStick® are registered trade names of CS Hyde Company,
Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc.
Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films.