TFL Gold Tape: CS Hyde Co, IL, USA

PTFE Coated PTFE Kapton® Kevlar® & Nomex® Rulon® Silicone Plasma Flame Spray UHMW Polyester Vinyl Foam Tapes Fiberglass Tape Double-Sided Tape

Talk LIVE with CS Hyde Rep 8am-5pm CMT

Teflon® TFL-Goldtape - CS Hyde Company
TFL-PTFE GOLD Tape
With Silicone or Acrylic Adhesive

Please order by phone:
1 800 461 4161

TFL-GOLD Tapes utilize TFL-GOLD Fabrics with the added benefit of an adhesive on one side. These tapes are manufactured from PTFE coated woven fiberglass substrates, utilizing a proprietary coating formulation. Silicone or acrylic adhesive systems are available. TFL-GOLD Tape products are specifically engineered to maximize application life, while minimizing down time in the most demanding environments. TFL-GOLD Tapes are abrasion resistant, non-stick, offer excellent release, are resistant to oils, grease and chemicals. TFL-GOLD Tapes are available in either an extremely smooth surface for maximum release or a texturized finish for a mechanical release. The texturized surface provides a mechanical bond or seal, which is desired in many heat-sealing applications. TFL-Gold Tapes are very abrasion resistant and maintain their low coefficient of friction even after prolonged service. TFL-Gold Tapes are excellent for use in the most challenging applications, such as PVC window welding (Fenestration Industry) , food processing, IV Bags sealing, Mylar Balloons sealing, rubber extruding, flexible packaging, etc. TFL-Gold Tapes are designed to out-perform and out-last all competitive products.

TFL-GOLDTape Characteristics

TFL-Gold Tapes are engineered to retain the distinctive properties of PTFE Fluoropolymer). By adding a glass fabric to the matrix, TFL-GOLDTape offers the added benefits of dimensional stability, durability, excellent tensile strength, and extremely low elongation (<1%). The addition of an adhesive on one side eliminates the need for mechanical fastening. Tapes with silicone adhesive operate over a wide temperature range, -100°F to 500°F (-73°C to 260°C), while tapes with acrylic adhesive operate over a narrower range of temperatures, -40°F to 350°F (-40°C to 177°C).

Typical Applications

Packaging:
Poly bag manufacturing
Impulse/L-Bar sealing
Form fill and seal
Over wrapping (Tray packing)
Side and End sealing
Blister tray covers
Vacuum pack machines

Food Products:
Work surface covering
Tray liners

Printing and Textiles:
Non-stick roll coverings

Building Products-FENESTRATION INDUSTRY:
Vinyl window manufacturing

Chemical Processing:
Tank seals and contaminant barriers
Gaskets, membranes, seals
   & diaphragms
Corrosion resistant chute, drum,
   and hopper liners
Lining of spray booths
Guide rails

Aerospace, Communications &
Military:
Composite mold release/bonding
Vacuum bagging

Pulp and Paper:
Non-stick roll coverings

Electronics:
Slot-stick and commutator insulation
Slot liners, spacers, field and
   armature winding
Wire and cable insulation and
   protection

Other Applications:
Manufacture of metalized balloons
Bearing pads/surfaces
Work surface covering
High temperature masking

Additional applications exist. Contact CS Hyde Company for more specific information.

Data Sheet - TFL GOLDTape

Product ID	Adhesive System	Nominal Thickness (Substrate)	Nominal Thickness (Adhesive)	Adhesion (oz./in. of width)	Tensile Strength* (lbs/sq in)	Maximum Operating Temperature	Full Width (in.)	Slit Roll Length(s) (yards)
TFL-GOLDTape3A	Acrylic	0.003”	0.0020”	45	56	350°F (177°C)	39.5	10, 18, 36
TFL-GOLDTape5A	Acrylic	0.005”	0.0025”	50	100	350°F (177°C)	39.5	18, 36
TFL-GOLDTape6A	Acrylic	0.006”	0.0025”	50	100	350°F (177°C)	39.5	18, 36
TFL-GOLDTape8A	Acrylic	0.008”	0.0025”	50	200	350°F (177°C)	39.5	18, 36
TFL-GOLDTape10A	Acrylic	0.010”	0.0025”	50	200	350°F (177°C)	39.5	18, 36
TFL-GOLDTape3S	Silicone	0.003”	0.0020”	40	56	500°F (260°C)	39.5	10, 18, 36
TFL-GOLDTape5S	Silicone	0.005”	0.0025”	45	100	500°F (260°C)	39.5	18, 36
TFL-GOLDTape6S	Silicone	0.006”	0.0025”	45	100	500°F (260°C)	39.5	18, 36
TFL-GOLDTape8S	Silicone	0.008”	0.0025”	45	200	500°F (260°C)	39.5	18, 36
TFL-GOLDTape10S	Silicone	0.010”	0.0025”	45	200	500°F (260°C)	39.5	18, 36

Please order by phone:
1 800 461 4161

Please note: Additional thicknesses and styles available upon special order.
*Disclaimer: All figures provided in the above table are based upon ASTM D 4969-97, the Standard Specification for Polytetrafluoroethylene (PTFE) Coated Glass Fabric. The above tensile values are based upon the ASTM D902 test method and are not actual values of CS Hyde Company’s materials. The above tensile values are 80% of the figures provided in Table 6 of specification D579. CS Hyde Company states that its actual tensile will be greater than the above material specification and that actual tensile values will be provided upon request. CS Hyde Company measures adhesion according to ASTM D 3654/D 3654M, Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes, and actual adhesion values will vary. Edge Tear values are based upon ASTM D1424 (Elmendorf Tearing Test) and are average values that can vary.

CS Hyde Company, Inc.
1351 N Milwaukee Avenue, Lake Villa, Illinois 60046
Phone: 800-461-4161 / 847-395-0325
Fax: 800-441-8063

Teflon® is a Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.

Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis

C4-NGen® and KYNStick® are registered trade names of CS Hyde Company,

Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc.

Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films.