ProductsPressure Sensitive Adhesive TapesHigh Performance FilmsCoated & Non-Coated FabricsSilicone Sheets3M™ ProductsThreads & CordsKevlar® ProductsCast Acrylic Rod
& TubeCapabilitiesBelting ServicesSheeting ServicesDie Cutting ServicesLamination ServicesSlitting ServicesDieless Knife Cutting
Print This PagePrint This PageEmail This Page

High Speed Slitting Services

High Speed SlittingCS Hyde Company’s slitting services feature the use of high-speed, computerized, top of the line slitting equipment.  We can maintain super-tight tolerances of (±) 1/32” or tighter depending on the material, and can slit substrates with or without adhesives.  Our equipment, in combination with years of operator experience, is capable of producing cut rolls from .125” wide up to 60”, and ranging from .0005” to .060” in thickness.  With no minimum quantities for in stock materials, you can order a single roll, or thousands, while maintaining a turn-around time of just a few days.

Some of the materials we most commonly slit include Teflon®(PTFE) ,Kapton®(polyimide), UHMW, high-temperature fiberglass and foil tapes, 3M® Transfer tapes, PTFE Coated tapes, Mylar®, as well as a wide variety of coated and non-coated fabrics.  We ship internationally as well as domestically, so no matter what country your company is in, please contact us to learn more about our advanced custom converting capabilities.

Request Information

Custom Slitting Services Capabilities

Industry Focus
Industrial
Aerospace
Chemical		 Food
Plastic
Materials
Tapes
Films
Fabric
3M®
ABS
Acetal
DuPont®
Fiberglass
Fluropolymers
Foil
HDPE
Kapton®
Kynar®
Metal		 PEEK
PVDF
Rubber
Silicone Sponge
Silicone
Solef®
Strip n Stick®
Teflon®
UHMW
Ultem®
Urethane
VHB
We also work with customer supplied materials
Features Adhesive
No Adhesive
Automation Capabilities Computer Controlled Process
Slitting Equipment Numerous Slitting machines for fast turnaround
Production Volume
Min
1 unit		 Max
1,000's units

Prototype
Low Volume
Small Run		 High Volume
Large Run
Typical Lead Times Available
Min
1 Day		  
Material Width
Min
.125 in
3.175 mm		 Max
60 in
1,524 mm
O.D. Max
10 in
254 mm
Material Thickness
Min
.0005 in
.0127 mm		 Max
.50 in
12.5 mm
Core Sizes Available 1 in
1.5 in
3 in
6 in
Tolerance (+/-) ±1/32 in
Tighter Tolerances Available Upon Request
Additional Services Provided
Belting
Die Cutting 		Laminating
Sheeting
Areas Served Ship National & International
Industry Standards
ASTM
American Society for Testing and Materials
Mil-Spec
Military Specifications
RoHS
Restriction Of Hazardous Substances (Compliant)		 WEEE
Proper Disposal of all electronic equipment via contract with Waste Management
Woman Owned Business
Small Business
File Formats
BMP
Bit Mapped Graphics
GIF
Graphics Interchange Format
JPG or JEPG
Joint Photographic Experts Group 		PDF
Portable Document Format
TIFF
Tagged Image File Format

Back to top
Site created by ThomasNet Web Solutions and powered by Navigator PlatformCopyright © 2012 CS Hyde Company. All Rights Reserved

Teflon® is a Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.
Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis
C4-NGen® and PVDFStick
are registered trade names of CS Hyde Company,
Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc.
Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films